Electrical Actuators |
ITQ 0020 |
Click here to view ITQ100 ~ 9000 |
|
|
Feature |
|
Suitable for small 1" ball valve automation. |
|
Very high efficiency & cyclic life. |
|
Free voltage (87~270 VAC,1Phase) and optional 24V AC/DC |
|
Very compact and light weight. |
|
|
|
|
|
|
|
|
Performance |
|
|
|
Model |
Rate
torque
(Nm) |
Duty
cycle
(%) |
Operating
time |
Adaption
(Double square
Female shaft) |
Rated current |
Motor
insulation
class |
Weight
(kgs) |
24V |
1Phase |
50Hz/60Hz |
AC |
DC |
110 |
220 |
ITQ 0020 |
20 |
50 |
11 |
9x9mm |
0.60 |
0.55 |
0.16 |
0.08 |
E |
1 |
|
|
|
|
|
Standard Specification |
|
|
MODEL |
ITQ 0020 |
Enclosure |
IP66, O-ring Sealed |
Main Power |
Free Voltage (110/220VAC/1Ph/50/60Hz) 24V AC/DC |
Duty Cycle (on-off) |
S2 : 50% |
Motor |
DC motor |
Limit Switches |
1 ea for Open & Close (5A, 250VAC) |
Extra Limit switches |
Relays for Open & Close (5A, 250VAC) |
Mounting |
ISO F03, 9 X 9 - DP12 Square female Shaft |
Travel Angle |
90ºC ±5ºC |
Cable entries |
1-PG11 Cable gland with wires 30cm long |
Surface protection |
Polyester coating |
Ambient temperature |
-10º C~ +65ºC |
Humidity (R.H) |
90% |
|
|
|
|
|
ITQ 0040 |
|
|
|
|
Feature |
|
Suitable for on-off small ball /plug valves and damper automation. |
|
By combination of spur gears, provide very high efficiency |
|
The motor is a specially designed induction motor that produces
high starting torques and thermally protected from overheating. |
|
Manual operation by Spanner and dial position indication |
|
Compact and light weight. |
|
High duty cycle. |
|
|
|
|
|
|
|
|
|
|
Performance |
|
|
|
Model |
Rate
torque
(Nm) |
Duty
cycle
(%) |
Operating
time |
Adaption
(Double square
Female shaft) |
Rated current |
Motor
insulation
class |
Weight
(kgs) |
No of
handwheel
turn |
1Phase |
3Phase |
DC |
50Hz |
60Hz |
110 |
220 |
380 |
440 |
24V |
ITQ 0040 |
40 |
50 |
14 |
12 |
14x14mm |
0.27 |
0.18 |
N/A |
N/A |
0.8 |
E |
3 |
7.5 |
|
|
|
|
|
Standard Specification |
|
|
MODEL |
ITQ 0040 |
Enclosure |
IP66, O-ring Sealed |
Main Power |
110/220VAC/1Ph/50/60Hz, 24V DC |
Control power |
110/220VAC/1Ph/50/60Hz |
Duty Cycle (on-off) |
S2 : 50%, max 30minutes |
Motor |
Induction motor |
Limit Switches |
1 ea for each travel (No extra switch) |
Space heater |
2W |
Manual operation |
Extruded shaft on bottom |
Indicator |
Continous Mechanical position indicator |
Mounting |
ISO F03 & F05 flange with double square female shaft |
Travel Angle |
90ºC ±10ºC |
Cable entries |
2 - PG 13.5 |
Terminal block |
Spring loaded push type |
Surface protection |
Anodized polyester coating |
Ambient temperature |
-20º C~ +70ºC |
Humidity (R.H) |
90% |
|
|
ITQ 0080 |
|
|
|
Feature |
|
Newly designed and developed for especially small ball &
plug valves and damper automation. |
|
Self locking combination of spur and worm gears that require no brake |
|
The motor is a specially designed induction motor that produces
high starting torques and thermally protected from overheating |
|
Mechanical Stopper bolts to provent from over travel |
|
Easy set cams without special tool. |
|
Manual operation by wrench directly to the worm gearbox and
dial position indication |
|
|
|
|
|
|
|
|
Performance |
|
|
|
Model |
Rate
torque
(Nm) |
Duty
cycle
(%) |
Operating
time |
Adaption
(Double square
Female shaft) |
Rated current |
Motor
insulation
class |
Weight
(kgs) |
No of
handwheel
turn |
1Phase |
3Phase |
DC |
50Hz |
60Hz |
110 |
220 |
380 |
440 |
24V |
ITQ 0080 |
80 |
50 |
16 |
14 |
17x17mm |
0.97 |
0.52 |
0.52 |
0.56 |
0.8 |
E |
3.5 |
7 |
|
|
|
Standard Specification |
|
|
|
|
|
|
MODEL |
ITQ 0080 |
Enclosure |
Weatherproof IP67,
O-ring
sealed |
Main Power |
110/220VAC/1Ph/50/60Hz, 380/440VAC/3Ph/50/60/Hz,
24VDC |
Control power |
110/220VAC/1Ph/50/60Hz |
Duty Cycle (on-off) |
S2 : 40%, Max 30 minutes |
Motor |
S4, 50%, 1200 start/Hour |
Duty cycle(modulating) |
Induction motor |
Limit Switches |
2 ea for each travel end
(1 each as dry contact) |
Space heater |
3W |
Manual operation |
By wrench (M6) directly to the worm gear |
Indicator |
Continous Mechanical position indicator |
Mounting |
ISO F05 & F07 flange with double square female shaft |
Self locking |
By means of worm gearing |
Travel Angle |
90º ±10º by external
adjustable mechanical
stopper |
Cable entries |
2-M20X1.5
(option: 2-PF 1/2”) |
Terminal block |
Spring loaded push type |
Surface protection |
Anodized & polyester coating |
Ambient temperature |
-20º C~ +70ºC |
Humidity (R.H) |
90% |
|
|
|
|
|
|
|
PK |
CT |
RPC |
- Potentiometer kit (output signal : 0~1 Kohm)
- High resolution potentiometer
|
- Current transmitter
(output signal : 4-20mA)
- Zero / Span Adjustment
- Convertable DIP Switch (4 wire to 2 wire)
|
- Remote position controller
(by input and output signal)
- Input : 4-20mA, 0-10VDC,
2~10VDC, 1~5VDC, 0~5VDC
- Output : 4-20mA, 0-10VDC,
2~10VDC, 1~5VDC, 0~5VDC
- Auto-calibration
- Reverse operating direction
|
|
|
|
|
|
|